Inspection Steps For The Molding Machine

Sep 04, 2026

Leave a message

After a period of use, the molding machine's press head may exhibit sluggish or slow swinging movements, thereby affecting operational efficiency. Restoring the machine to normal operation requires a careful diagnosis to identify the root cause of this anomaly and the implementation of appropriate corrective measures. Drawing on years of manufacturing experience, Qingdao Huachuan Group outlines the following step-by-step inspection procedure to resolve issues involving sluggish or slow press head movement.
Step 1: Check the clearance between the front and rear plates of the press head for obstructions such as iron filings or other foreign objects; clear away any debris and test-run the machine.
Step 2: Disconnect the two rear air intake hoses on the press head. Operate the control valve to toggle between the "home" and "swing-in" positions, and observe whether the airflow from the hose ends is sufficient. Insufficient airflow causes slow press head movement; if this is the case, trace the line back through the control valve all the way to the air filter to identify the blockage.
Step 3: Open the cover plate on top of the press head and inspect the gear rack for severe rusting. Excessive rust can cause sluggish movement of the press head; this issue can be resolved by cleaning the rack with kerosene or gasoline.

Send Inquiry