The shell core machine operates based on the hot core box process. Its core mechanism involves using compressed air to shoot resin-coated sand at high speed into a preheated core box; the shooting process simultaneously fills the box and compacts the sand. Subsequently, the sand hardens rapidly due to the heat from the core box.
To produce hollow shell cores-thereby saving sand and improving gas permeability-the equipment features a mold frame rollover function. After the sand is shot and initial curing occurs, the mold frame automatically rotates 180°, dumping out the uncured sand from the center of the core box to form a hollow shell core with uniform wall thickness. This process saves approximately 40% of the resin-coated sand and resolves the issue of poor gas permeability associated with solid sand cores.
A complete operating cycle typically comprises the following steps: mold closing → sand shooting sleeve advances and clamps → sand shooting → sand shooting sleeve releases and retracts → sand core cures in the hot core box → mold frame rotates 180° and vibrates to dump excess sand → mold frame returns to position → mold opening → sand core ejection → mold closing, ready for the next cycle. The entire process can be controlled via PLC for manual, single-cycle automatic, or fully automatic operation.
