• Automatic Multi Contact Flaskless Molding Machine
    The sand mold is formed without a flask. The Automatic Multi Contact Flaskless Molding Machine uses horizontal parting, eliminating the need for flask return conveyors and the maintenance...
  • Horizontal‑parting Hot Box Core Shooter
    The HorizontalParting Hot Box Core Shooter is suitable for core designs where the parting direction and access to the cavity are important, including flat cores and cores with deep cavities....
  • Jolt And Squeeze Machine
    The Jolt and Squeeze Machine first uses jolting to settle the sand, then applies squeezing pressure to increase mold hardness. The jolting load ranges from 400 to 1000 kgf, while the squeeze...
  • Micro Vibration Compaction Molding Machine
    This sequence helps improve mold density and distribute compaction more evenly throughout the flask. The Micro Vibration Compaction Molding Machine operates at 500–700 cycles per minute, with a...
  • Multi-piston Molding Machine
    A single press head may not compact flat surfaces, stepped areas, and deep pockets evenly. The Multi-Piston Molding Machine uses segmented heads sized to match the mold, allowing each section to...
  • Plc Shockless Jolt-squeeze Moulder
    On manually adjusted molding machines, operators often need to readjust settings when changing patterns. The Plc Shockless Jolt-Squeeze Moulder uses PLC/CNC control to store process parameters,...
  • Vertical Parting Hot Box Core Shooter
    The Vertical Parting Hot Box Core Shooter is available with an optional dual-station configuration, allowing one station to produce cores while the other is being reloaded.
  • Shell Core Machine
    The shell core process forms a hollow core with a defined wall thickness rather than filling the entire cavity with sand. Typical shell walls are approximately 5–10 mm thick, helping reduce sand...
  • Semi Automatic Molding Machine
    The Semi Automatic Molding Machine supports manual and semi-automatic operation, making it a practical option for foundries looking to keep initial equipment costs down. Its controls are...
  • Flaskless Molding Machine
    Traditional flask molding systems require additional equipment for flask transfer, lifting, and maintenance. The Flaskless Molding Machine forms molds without flasks, reducing the need for...
  • Squeeze Molding Machine
    The Squeeze Molding Machine uses this direct compaction method to produce flat mold surfaces and clear contours on suitable casting shapes. Its straightforward mechanism also helps reduce the...
  • Green Sand Molding Machine
    The Green Sand Molding Machine supports this process, helping reduce the need for fresh molding sand and limit waste sand discharge. The molds can proceed to pouring without a separate drying stage.
First 12 Last

As one of the most professional molding equipment manufacturers and suppliers in China, we also support customized service. We warmly welcome you to buy advanced molding equipment at competitive price from our factory. If you have any enquiry about pricelist, please feel free to email us.

Send Inquiry