1. Comply with the general operating procedures for molding and core-making machines.
2. During the mold-stripping phase, the ejector pins must rise smoothly and synchronously; otherwise, notify maintenance personnel for repairs.
3. During the compaction phase, the sand-pressing crossbeam assembly must rotate smoothly; avoid abrupt movements that could cause impact or shock.
4. Before and after production, operators must verify the condition of the molds and ensure that the locating pins for the outer mold and core mold align correctly.
5. Operators must remain focused and attentive while operating the molding machine.
6. After completing the mold assembly (closing the flask), transport the mold to the designated pouring station (or line) in accordance with process specifications. Arrange the molds neatly and secure them using weights or clamps. Mark any miscellaneous items clearly.
7. Do not stack sand flasks excessively high (generally not exceeding two meters); keep tools neatly organized to prevent accidents.
8. Exercise caution when using blowtorches to prevent fire hazards; use only low-voltage (below 36V) portable work lights-high-voltage (220V or above) bulbs are strictly prohibited.
9. When using an overhead crane with the molding machine, first inspect the lifting gear for defects. Ensure the hook is securely attached and the chain is taut before lifting; angled lifting and overloading are strictly prohibited.
10. Never perform mold repairs beneath a suspended sand flask. When opening, turning over, or setting down large sand flasks, use square blocks to support them securely.
11. Sand flasks used with the machine must be structurally sound; lifting lugs/handles must be intact, free of cracks, and undeformed.
