Daily Maintenance:
Cleaning: After daily use, remove sand, dust, and oil stains from the equipment's exterior to prevent impurities from entering the internal mechanisms. For instance, the blue casing of the Z145 series molding machine (manufactured by Qingdao Binhai Jincheng Foundry Machinery Co., Ltd.) shows dirt easily and requires regular wiping with a damp cloth.
Lubrication Check: Inspect lubrication points (such as guide rails and bearings) to ensure adequate lubrication. For example, the dual-head molding machine from Botou Chensong Molding Machinery Factory recommends replenishing lubricant every 8 hours.
Air Pressure and Voltage Monitoring: During operation, maintain the working air pressure at 0.58 MPa (e.g., for Jincheng Machinery's ZD0806B pneumatic multi-head molding machine) and keep the voltage stable at 220V ±10%.
Periodic Inspection (Weekly or Monthly):
Fastener Check: Bolts on vibrating components (such as the jolt mechanism) are prone to loosening and require weekly tightening. For the automatic molding machine from Qinhuangdao Yinyuan Foundry Machinery Equipment Co., Ltd., which operates at a vibration frequency of 3000 Hz, pay special attention to screws in high-frequency vibration areas.
Replacement of Wear Parts: Components such as seals and filter elements should be replaced every three months. For example, the pneumatic components of Jincheng Machinery's jolt-squeeze flask-stripping molding machine require high sealing integrity, necessitating regular O-ring replacement.
Drive System Check: Adjust the tension of belts or chains to meet manufacturer standards (e.g., the Chensong dual-head molding machine requires a belt deflection of ≤5 mm).
Professional Maintenance (Semi-annual or Annual):
Hydraulic System Maintenance: Change the hydraulic oil and clean the oil tank to prevent fluid degradation. The hydraulic system of the Yinyuan automatic molding machine recommends the use of ISO VG46 anti-wear hydraulic oil. Electrical System Inspection: Check motor insulation resistance (≥1 MΩ) and wiring for signs of aging; this is particularly important for large-scale equipment with power ratings exceeding 15 kW (such as various molding machines from Jincheng Machinery).
Precision Calibration: Calibrate the equipment base using a level to ensure molding accuracy. For instance, the sand mold dimensional tolerance for the Z145 series molding machines must be maintained within ±0.5 mm.
