Classification of Molding Machines

Aug 02, 2026

Leave a message

Squeeze Molding Machine
This machine compacts molding sand within a flask by applying pressure via a squeeze head or the pattern itself, using pneumatic or hydraulic power. The applied pressure typically ranges from 0.25 to 0.4 MPa. A drawback of this type of machine is that the sand mold is less compact in areas furthest from the pressure application surface. High-pressure molding machines emerged in the early 1950s, delivering pressures exceeding 0.7 MPa across the mold surface. Their squeeze heads come in various configurations, such as flat, contoured, and multi-head (multi-squeeze-foot) designs; the high-pressure multi-head type is the most widely used. In multi-head machines, the squeeze head is divided into numerous small, vertically movable blocks-or "heads"-and high compacting force is generated via hydraulic cylinders. During compaction, each head exerts pressure proportional to the height of the pattern beneath it (i.e., the thickness of the sand layer), resulting in a mold with high, uniform compactness and hardness. These machines are equipped with micro-jolt mechanisms, enabling them to handle complex patterns. They typically feature a four-column structure and are available in single-station or dual-station configurations. To accommodate small-to-medium batch production, they often include rapid pattern-changing devices, allowing pattern swaps without halting machine operation. High-pressure multi-head molding enables the production of sand castings with thin walls, precise dimensions, and smooth surface finishes.
Jolt Molding Machine
These machines are categorized into standard jolt types and micro-jolt types. The flask and pattern are secured to the machine's table; compaction relies on the inertia of the sand grains as the table drops and impacts the anvil base. These machines generate significant noise and produce molds with poor compaction in the upper sections; consequently, they have largely been superseded by micro-jolt squeeze molding machines.


Jolt-Squeeze Molding Machine
By applying a squeezing action to a mold that has already been compacted via jolting, a mold with uniform compaction throughout-from top to bottom-can be achieved. The micro-jolt squeeze molding machine is commonly used; it operates by dropping the worktable onto a floating jolt plate to micro-jolt and pre-compact the molding sand, followed by a final squeezing operation. Micro-jolting employs high-frequency (500–1000 cycles/min) and low-amplitude (5–25 mm) vibrations, replacing the low-frequency (60–120 cycles/min) and high-amplitude vibrations found in traditional jolt-squeeze machines. Molds produced by this type of machine are of high quality, and the machine has relatively low requirements for foundation support.
**Blow-Squeeze Molding Machine**
This machine uses compressed air to uniformly blow molding sand into the flask for pre-compaction, followed by the application of pressure for final compaction. Common types include vertical-parting flaskless blow-squeeze machines and horizontal-parting flask-removal blow-squeeze machines. Vertical-parting flaskless machines do not use flasks; sand is blown directly into a molding chamber containing the pattern plate. They offer high dimensional accuracy and productivity-since mold cavities exist on both sides of the mold-though core setting is relatively difficult, and there are strict requirements for sand quality. Horizontal-parting flask-removal machines use flasks for molding; the mold is assembled and the flask removed after compaction, making core setting more convenient while maintaining high productivity.
**Sand Slinger**
This machine uses rotating blades to throw wads of sand, thereby compacting the mold. Sand slingers are characterized by simultaneous sand filling and compaction, a simple and lightweight structure, and strong adaptability. However, the blades are prone to wear, and productivity is relatively low.
**Fully Automatic Molding Machine**
Fully automatic molding machines are designed to automate the mold-making process and can integrate jolt-compaction, squeeze-compaction, and blow-squeeze technologies [5]. As of 2026, these machines offer high productivity; single-cycle times for some models range from 28–30 seconds or 26–28 seconds (excluding core setting time), while dual-station models can achieve a cycle time of 20 seconds (including core setting). Sand-blowing technologies are diverse-featuring methods such as side-blowing and top/bottom-blowing-to enhance filling quality and versatility. The dual-station design enables simultaneous molding and core-setting operations, further enhancing efficiency. The equipment integrates Industry 4.0 smart features, such as fault diagnosis and remote monitoring. Its design prioritizes ease of use and safety, featuring capabilities like one-touch operation and a convenient core-setting station.

Send Inquiry