Molding Machine Structure

Sep 02, 2026

Leave a message

The molding machine consists of a main frame, a mold-stripping mechanism, a jolt-squeeze mechanism, a swing-arm squeeze head assembly, and a pneumatic piping system.
1. Main Frame: A robust, hollow frame structure. Its upper section supports the swing-arm squeeze head assembly; during the squeezing operation, the swing arm engages with the frame so that the squeezing force is borne by the frame itself. The frame is bolted to the jolt mechanism. Regarding the squeeze head assembly, the squeeze head is mounted on a rotatable swing arm and features a screw-type lifting mechanism, allowing the distance between the squeeze head and the molding flask to be adjusted according to the flask's height.
2. Swing Arm: Movement of the swing arm (swinging in and out) is achieved by controlling the reciprocating motion of a cylinder piston via a manual pull valve.
3. Mold-Stripping Mechanism: Composed of two mold-stripping cylinders, connecting rods, a balance shaft, a stripping table, and stripping pins. When the stripping cylinders actuate, they drive the connecting rods, balance shaft, and stripping table, causing four pins to simultaneously lift the flask and strip the mold.
4. Jolt-Squeeze Mechanism: Utilizes a spring-assisted micro-jolt pneumatic squeezing structure, where the jolt action enhances the compaction effect. A clamping cylinder locks the jolt-squeeze cylinder body during the stripping phase and releases it during the mold-lowering phase.
5. Pneumatic Piping System: Compressed air enters the system and passes through an air filter to remove moisture and impurities. It then passes through a lubricator, where lubricating oil is injected to supply the various pneumatic components and mechanisms. Machine operations are controlled via a manual pull-valve console.
6. Air Supply and Lubrication: The machine operates using compressed air as the power source and oil for lubrication. Intake pressure and oil flow rates are regulated by a pressure-reducing valve and an oil-regulating valve, respectively. As the air supply passes through the lubricator, oil is drawn into the pipeline via the siphon principle and enters the piping system as a mist to provide lubrication.

Send Inquiry