The working principle of high-pressure molding machines is based on high-pressure compaction technology, where the specific compaction pressure typically exceeds 0.7 MPa. In high-pressure multi-squeeze-head molding machines, the squeeze head is divided into numerous small, vertically movable blocks (squeeze heads or "feet"). Driven by hydraulic cylinders, these heads exert significant force; during compaction, each head applies pressure corresponding to the height of the pattern beneath it (i.e., the thickness of the sand layer being compressed), thereby achieving high and uniform sand mold compactness and hardness. These machines are equipped with a micro-vibration mechanism to accommodate the molding of complex patterns and typically feature a four-column structure available in either single-station or dual-station configurations. To facilitate the production of small-to-medium batches of castings, they are often equipped with rapid pattern-changing devices, allowing for pattern replacement without halting machine operation.
