The operation of the horizontal core shooter follows a closed-loop sequence: metered sand supply, compressed-air injection, mold cavity filling, thermal curing, and ejection/demolding. First, resin-coated sand enters the metering chamber from a hopper, where a pneumatic or mechanical metering device ensures precise dosing. Next, compressed air (typically at 0.5–0.7 MPa) is instantaneously introduced into the shooting head, propelling the sand grains at an initial velocity of 20–30 m/s through a horizontal channel and into a core box preheated to 200–260°C. Driven by the combined effects of high-speed impact and heat transfer, the resin on the surface of the sand grains rapidly melts and undergoes cross-linking and curing, achieving initial solidification within approximately 3–8 seconds. Finally, the core box opening/closing mechanism operates, and ejector pins smoothly push out the cured sand core. The entire process relies on the coordinated control of three key factors: time, temperature, and pressure.
